Car in a dark studio with dramatic side lighting

HomeLPG conversion

LPG / Autogas conversion · Bengaluru

LPG conversion. Liquid in the tank. Gas in the engine.

Autogas systems assessed, fitted, tuned and serviced at our Mysore Road workshop, opposite BHEL, with BRC, Lovato and OMVL kits.

FuelLiquefied petroleum gas
Kit brandsBRC · Lovato · OMVL
Since1999, Mysore Road

01 / What LPG conversion is

LPG is stored as a liquid under moderate pressure, then turned into gas before it reaches the engine.

Vehicle being refuelled at an autogas dispenser Representative image

An LPG conversion adds a tank and a gas system alongside the vehicle's petrol system. On most retrofit systems, the vehicle can then run on either fuel.

Automotive LPG is often called autogas. Unlike CNG, which is stored as a compressed gas at high pressure, LPG is stored as a liquid, so the tank and the components that handle it are different. Whether LPG suits your vehicle depends on the vehicle itself, the space for a tank and how and where you drive.

LPG

Stored as a liquid under moderate pressure, in a cylindrical or ring-shaped tank.

CNG

Stored as a compressed gas under high pressure, in a cylinder.

02 / How an LPG system works

Liquid, vapour, gas.

A simplified view of a typical sequential LPG system. Layouts vary between kits and vehicles, and we'll explain the system recommended for yours.

  1. Liquid 01

    Fill

    LPG enters through the filling connection at an autogas station.

  2. Liquid 02

    Store

    It is held as a liquid in the tank, controlled by the valve fitted to it.

  3. Vaporise 03

    Vaporise

    The reducer / vaporiser, typically warmed by engine coolant, turns the liquid into gas at a controlled pressure.

  4. Gas 04

    Inject

    Gas injectors deliver measured amounts of gas into the engine's intake.

  5. Gas 05

    Control

    The control unit manages gas delivery and the switch between petrol and LPG.

Under-bonnet view of an LPG kit fitted to a car engine Representative image

03 / LPG system components

Inside an LPG kit.

The main parts of a typical LPG system. Actual configuration varies with the kit and the vehicle, and not every system uses every part shown here.

Ring-shaped LPG tank Representative image
01 · Tank

Tank

Holds the LPG as a liquid. Tanks come in two common shapes: cylindrical, usually mounted in the boot, and ring-shaped (toroidal), which can often sit in the spare-wheel well. The right shape depends on the vehicle and the space available.

LPG reducer and vaporiser unit Representative image
02 · Reducer / vaporiser

Reducer / vaporiser

Turns the liquid LPG into gas and controls its pressure. It is typically connected to the engine's cooling system, which supplies the warmth needed for vaporisation.

Gas injector rail Representative image
03 · Injectors

Injectors

In sequential systems, gas injectors deliver measured amounts of gas into the intake for each cylinder, timed by the control unit.

Electronic control unit for an LPG system Representative image
04 · Electronic control unit

Electronic control unit

The gas system's controller. It works out gas delivery using signals from the vehicle, and manages the changeover between petrol and LPG.

Valve assembly fitted to an LPG tank Representative image
05 · Valves

Valves

A valve assembly on the tank (often called a multivalve) typically handles filling, the outlet and the level gauge, and limits how full the tank can be filled. Solenoid valves shut off the gas when the system isn't in use.

LPG filling connection on a vehicle Representative image
06 · Filling connection

Filling connection

The external point where the autogas nozzle connects to refuel the tank. Its position depends on the vehicle and the installation.

Also in most kits: gas pipes and fittings, filters, and a changeover switch with a gas-level indicator.

04 / LPG conversion process

From inspection to handover.

Technician installing an LPG kit in a vehicle Representative image
  1. 01

    Vehicle inspection

    Engine, fuel system, general condition, space for a tank and the vehicle's documents.

  2. 02

    System recommendation

    The system, kit and tank shape that suit the vehicle, explained before any work starts.

  3. 03

    Installation

    Tank mounted, lines routed, and the reducer, injectors, control unit, valves and switch fitted and wired.

  4. 04

    Testing and tuning

    Leak checks, then tuning so the engine runs properly on LPG and switches fuels as it should.

  5. 05

    Handover

    How to use the switch and refuel, what to watch for, and guidance on recording the conversion on the registration.

05 / Vehicle compatibility

Suitability is assessed, not assumed.

There's no blanket list of vehicles that can take LPG. We look at your vehicle individually, and we'll tell you plainly if LPG isn't the right choice.

  1. 01

    Engine and fuel system

    LPG retrofit kits are generally designed for petrol engines. The injection type affects which system suits.

  2. 02

    Space for the tank

    A cylindrical tank uses boot space; a ring-shaped tank may fit the spare-wheel well. Both depend on the vehicle.

  3. 03

    Engine condition

    Existing engine faults should be fixed first. Gas won't cure underlying problems.

  4. 04

    Model-specific factors

    Some vehicles need particular kits or fittings, and some may not be suitable at all.

  5. 05

    Where you refuel

    Access to autogas stations on your regular routes affects whether LPG is practical.

  6. 06

    Rules and paperwork

    The conversion has to meet the rules that apply to your vehicle and be recorded on its registration.

Quick vehicle check

Is LPG right for your vehicle?

Your details open in WhatsApp, ready to send. Nothing is sent until you tap Send in WhatsApp.

Prefer to talk? 99001 18991 · 73495 95609

Technician inspecting a gas system installation Representative image

06 / Installation quality and safety

Careful fitting. Then checking.

A gas system is only as good as its installation. Before handover we inspect the work and test the system.

  • Secure tank mounting

    The tank is fixed firmly, with its valve assembly protected and accessible.

  • Sealed and vented where required

    Valve housings are sealed and vented to the outside where the installation requires it.

  • Leak checks

    Joints, fittings and gas lines are checked for leaks.

  • Running on both fuels

    The engine is checked on petrol and LPG, including the changeover.

07 / LPG repair and maintenance

Something not right? Start here.

We diagnose and repair LPG systems and service them to keep them running properly. Common signs, and where we start looking:

You notice We start by checking
Won't switch over to LPG The switch, sensors, valves and control unit
Hesitation or misfiring on gas Injectors, reducer, filters and tuning
Gas seems to run out faster Leaks, the level gauge and tuning
Warning light or beeping Fault codes in the gas control unit
Gas smell Stop safely, switch off and call us. Don't drive on.
Routine maintenance
  • Inspection of lines, fittings and the tank's valve assembly
  • Filter replacement where the kit requires it
  • Reducer and injector checks, and a tuning check

How often depends on the kit and how the vehicle is used. Ask us about yours.

Mechanic servicing a vehicle's LPG system Representative image

08 / LPG questions

Before you convert to LPG.

Every vehicle is different, so treat these as a starting point and ask us about yours.

Ask an LPG question

09 / Talk to the workshop

Ask us about LPG for your vehicle.

Workshop320/2, Rose Garden, Mysore Road, opposite BHEL, Bengaluru 560026

Get directions

Also see: Home