Technician fitting gas system components in an engine bay 01Installation
Mechanic running diagnostics on a vehicle's gas system 02Maintenance
Representative images

HomeInstallation & maintenance

CNG & LPG · Installation · Inspection · Repair · Maintenance

Precision installation. Responsible maintenance.

CNG and LPG systems fitted, inspected, repaired and serviced at our Mysore Road workshop, opposite BHEL, since 1999.

01 / Service overview

Five services, one workshop.

From the first fitting to years of upkeep, CNG and LPG systems are handled in the same place, by the same workshop.

  1. 01

    CNG installation

    Assessment, kit recommendation, fitting and tuning of CNG systems.

    About CNG
  2. 02

    LPG installation

    Assessment, tank and kit recommendation, fitting and tuning of LPG systems.

    About LPG
  3. 03

    Inspection

    A careful look at an existing gas system and how it's running.

    When to book
  4. 04

    Repair

    Diagnosis of faults and repair or replacement of kit components.

    Common concerns
  5. 05

    Maintenance

    Periodic servicing of CNG and LPG systems, as advised for the kit and how it's used.

    What's involved

02 / Installation process

How a system is fitted.

Technician fitting a gas kit to a vehicle Representative image
  1. 01

    Vehicle assessment

    We look at the engine and fuel system, the vehicle's condition, the space for a cylinder or tank, and its documents. Some vehicles aren't suitable, and we'll say so.

  2. 02

    System recommendation

    We recommend CNG or LPG, the system type and a kit from BRC, Lovato or OMVL to suit the vehicle, and explain it before any work starts.

  3. 03

    Installation

    The cylinder or tank is mounted, gas lines are routed, and the reducer, injectors, control unit, valves, filling point and switch are fitted and wired.

  4. 04

    Testing

    Connections are checked for leaks, and the system is tuned so the engine runs properly on gas and switches between fuels as it should.

  5. 05

    Handover

    We show you how to use the switch and refuel, what to watch for, and guide you on recording the conversion on the vehicle's registration.

03 / Workshop standards

How we approach the work.

A gas system depends on how well it's fitted. These are the things we pay attention to on every job.

  1. S·01

    Careful workmanship

    Components are fitted to suit the vehicle, without shortcuts to save time.

  2. S·02

    Component inspection

    Parts are checked before they go into the vehicle, and existing parts are checked during servicing.

  3. S·03

    Secure routing

    Gas lines and wiring are routed and fixed away from heat sources and moving parts.

  4. S·04

    Sound connections

    Fittings and joints are made up properly and checked for leaks.

  5. S·05

    Final checks

    Before handover, the vehicle is run on both fuels and the changeover is checked.

Close-up of gas line fittings being connected Representative image
Mechanic inspecting the components of a CNG system Representative image

04 / CNG system maintenance

Looking after a CNG system.

A CNG system works at high pressure and runs alongside the engine every day. Periodic inspection and professional servicing help it keep working safely and smoothly.

A CNG service can include
  • Checking the cylinder's mounting and valve
  • Inspecting gas lines, fittings and connections for leaks or wear
  • Checking the reducer and injectors
  • Replacing filters where the kit uses them
  • A diagnostic and tuning check of the control unit

How often? It depends on the kit and how the vehicle is used, so we'll advise for yours. CNG cylinders also need periodic testing under the applicable rules.

Mechanic inspecting the components of an LPG system Representative image

05 / LPG system maintenance

Looking after an LPG system.

An LPG system stores fuel as a liquid and turns it into gas under the bonnet. Professional inspection and servicing keep each stage working as it should.

An LPG service can include
  • Checking the tank's mounting and its valve assembly
  • Inspecting gas lines, fittings and connections for leaks or wear
  • Checking the reducer / vaporiser and its connections
  • Checking the injectors, and replacing filters where the kit uses them
  • A diagnostic and tuning check of the control unit

How often? It depends on the kit and how the vehicle is used, so we'll advise for yours. Gas tanks also have inspection requirements under the applicable rules.

06 / Common concerns

Signs your gas system needs attention.

None of these is a diagnosis. They're reasons to have the system looked at by a professional. Please don't attempt repairs to gas components yourself.

If you suspect a gas leak

Stop. Move away. Get help.

  1. Stop using the vehicle. Pull over where it's safe and switch off the engine.
  2. Keep away from ignition sources. No smoking, flames or sparks nearby. Don't operate switches or try to restart.
  3. Move yourself and others away from the vehicle.
  4. Seek qualified emergency help. In an emergency in India, call 112.
  5. Contact us only once you're safe, and don't drive the vehicle until it has been checked.
01

Warning indicators

A warning light, an unusual beeping from the changeover switch, or an indicator that behaves differently from normal.

02

Performance changes

Hesitation, misfiring, rough running or a noticeable loss of power when running on gas.

03

Unusual smells

Any smell of gas, in or around the vehicle. Treat it as a possible leak and follow the steps above.

04

System irregularities

The system won't switch to gas, the gauge reads oddly, gas seems to run out faster, or refuelling behaves differently.

07 / When to arrange an inspection

Routine, or right away.

Some checks can be planned; others shouldn't wait. If you're unsure which applies, ask us.

Plan a visit

Routine inspection

  • When servicing is due, as advised for your kit
  • When the cylinder or tank's periodic testing is due
  • After buying a used vehicle that already has a gas kit
  • If the system hasn't been checked for a long time
  • After work on the engine or nearby parts
Arrange an inspection
Don't wait

Contact us right away

  • Any smell of gas (follow the safety steps first)
  • A warning light or alarm from the gas system
  • Misfiring, hesitation or rough running on gas
  • The system won't switch over to gas
  • Visible damage to the cylinder, tank, lines or fittings, for example after an accident
Call 99001 18991

08 / Questions

Installation and servicing questions.

Every vehicle and kit is different, so treat these as a starting point.

Ask a question

09 / Book the workshop

Fitting, inspection or service? Talk to us.

Tell us the vehicle and what you need. We'll take it from there.

Workshop320/2, Rose Garden, Mysore Road, opposite BHEL, Bengaluru 560026 · Get directions

Also see: Home · CNG conversion · LPG conversion · Vehicle compatibility