Car photographed at night under dramatic lighting

HomeCNG conversion

CNG conversion · Bengaluru · Since 1999

CNG conversion. Assessed, fitted, tuned.

We assess your vehicle, recommend a suitable CNG system and fit it with BRC, Lovato or OMVL kits at our Mysore Road workshop, then tune and test it before handover.

01 / What CNG conversion is

A second fuel, added to your vehicle.

CNG is natural gas stored under high pressure in a cylinder fitted to the vehicle. A conversion adds a set of components alongside the existing petrol system, so the engine can also run on gas.

On most retrofit systems the vehicle keeps its petrol system and can switch between petrol and CNG. Whether a conversion makes sense depends on the vehicle, the space available for a cylinder and how and where you drive, which is why we assess every vehicle individually.

Fuel
Compressed natural gas, stored in a high-pressure cylinder
Petrol system
Usually retained, so you can switch fuels
Cylinder space
Usually in the boot or load area
Suitability
Assessed for each vehicle before any work
CNG refuelling nozzle connected to a vehicle's filler point Representative image

02 / How a CNG system works

From the filler to the engine.

A simplified view of the gas path in a typical CNG system. Layouts vary between kits and vehicles, and we'll explain the system recommended for yours.

Engine bay of a car fitted with a gas conversion kit Representative image
  1. 01

    Refuel

    Gas enters through the filler valve at a CNG station.

  2. 02

    Store

    It is held under high pressure in the cylinder, behind its valve.

  3. 03

    Reduce

    The reducer lowers the pressure to a level the engine can use.

  4. 04

    Meter

    Injectors (or a mixer, in conventional systems) deliver gas into the intake.

  5. 05

    Control

    The control unit and switch manage gas delivery and the change between fuels.

03 / CNG kit components

Six parts that matter.

The main components in a CNG kit. The exact parts, their layout and their specifications depend on the kit and the vehicle.

CNG cylinder Representative image
01

Cylinder

Stores the compressed gas. It is mounted securely, usually in the boot, and needs periodic testing under the applicable rules.

CNG pressure reducer Representative image
02

Reducer / vaporiser

Brings the gas down from cylinder pressure to the much lower working pressure the injectors need.

Gas injector rail Representative image
03

Injector rail

In sequential systems, delivers measured amounts of gas into the engine's intake for each cylinder.

Electronic control unit for a gas system Representative image
04

Electronic control unit

The gas system's controller. It manages gas injection and the switch between petrol and CNG.

Gas valves used in a CNG kit Representative image
05

Valves

The cylinder valve and solenoid valves control and shut off the gas supply, so gas flows only when the system needs it.

CNG filler valve on a vehicle Representative image
06

Filler valve

The refuelling point, where the vehicle is connected to the CNG dispenser.

Also in most kits: gas pipes and fittings, filters, and a changeover switch with a gas-level indicator.

04 / Sequential or conventional

Two ways to deliver the gas.

CNG kits broadly fall into two types. Which one suits a vehicle depends mainly on its engine and fuel system, so we recommend the type after inspecting it.

Compared
Type ASequential injection
Type BConventional (mixer)
How gas is delivered
Gas injectors deliver gas into the intake for each cylinder in turn, much like petrol injection.
A mixer in the air intake draws gas in with the incoming air.
How it's controlled
A dedicated control unit works out gas delivery, using signals from the vehicle's own petrol injection and sensors.
Simpler control; gas flow is set mainly by the reducer and mixer, with basic electronics on some kits.
Typically used on
Modern multi-point fuel-injected (MPFI) petrol vehicles.
Older vehicles, including carburettor engines.
Setting up
Calibrated to the engine with diagnostic software after fitting.
Adjusted mechanically and by tuning the reducer and mixer.

General descriptions only. Designs differ between kit makers and models. We'll explain the system recommended for your vehicle and why.

05 / Installation process

Five stages, one workshop.

Every CNG conversion starts with your vehicle, not with a kit.

Technician installing a CNG kit in a car Representative image
  1. 01

    Vehicle inspection

    We look at the engine and fuel system, the vehicle's general condition, the space available for a cylinder, and its documents.

  2. 02

    Kit recommendation

    We recommend a system type, kit and cylinder arrangement suited to the vehicle and the way you drive, and explain the options before any work starts.

  3. 03

    Installation

    The cylinder is mounted, gas lines are routed, and the reducer, injectors, control unit, valves, filler and switch are fitted and wired.

  4. 04

    Testing and tuning

    Joints and lines are checked for leaks, and the system is tuned so the engine runs properly on CNG and switches between fuels as it should.

  5. 05

    Handover and documentation guidance

    We show you how to use the switch and refuel, what to watch for, and guide you on recording the conversion on your vehicle's registration.

06 / Is my vehicle suitable?

Not every vehicle can be converted.

Suitability is decided vehicle by vehicle. These are the factors we look at, and we'll tell you plainly if CNG isn't a good fit for yours.

  1. 01

    Engine and fuel system

    CNG retrofit kits are generally designed for petrol engines. The injection type affects which system suits.

  2. 02

    Space for the cylinder

    The cylinder needs secure mounting space, usually in the boot, which reduces luggage room.

  3. 03

    Condition of the engine

    An engine with existing faults should be put right first; gas won't fix underlying problems.

  4. 04

    Model-specific factors

    Some vehicles need particular kits or fittings, and some may not be suitable at all.

  5. 05

    How and where you drive

    Your daily distance and access to CNG stations on your routes affect whether conversion is worthwhile.

  6. 06

    Rules and paperwork

    The conversion has to meet the rules that apply to your vehicle and be recorded on its registration.

Quick vehicle check

Send us your vehicle details.

Your details open in WhatsApp, ready to send. Nothing is sent until you tap Send in WhatsApp.

Prefer to talk? 99001 18991 · 73495 95609

Technician checking gas line connections for leaks Representative image

07 / Quality, safety and testing

Checked before it leaves the workshop.

A gas system is only as good as its fitting. Before handover we check the work, not just the parts.

  • Secure cylinder mounting

    The cylinder is fixed firmly to the vehicle and its valve is accessible.

  • Leak checks

    Joints, fittings and gas lines are checked for leaks.

  • Routing and wiring

    Gas lines and wiring are routed and secured away from heat and moving parts.

  • Running on both fuels

    The engine is checked on petrol and on CNG, including the switch between them.

Cylinder testing: CNG cylinders need periodic testing under the applicable rules. Ask us when yours is due.

08 / Repairs and maintenance

Keeping a CNG system healthy.

We diagnose faults, replace worn components and service CNG kits. Ask us how often your system should be checked, as it depends on the kit and how the vehicle is used.

Mechanic servicing a vehicle's gas system Representative image
Repairs

When something isn't right

  • Engine hesitates or misfires on CNG
  • System won't switch over to gas
  • Gas smell, or a suspected leak
  • Warning light or beeping from the switch
  • Faults in the reducer, injectors or control unit
Maintenance

Routine care

  • Inspection of lines, fittings and valves
  • Filter replacement where the kit requires it
  • Reducer and injector checks
  • Tuning check with diagnostic software
  • Reminders about cylinder testing

Smell gas? Stop somewhere safe, switch off the engine and call us before driving on.

09 / CNG questions

Before you convert to CNG.

Every vehicle is different, so treat these as a starting point and ask us about yours.

Ask a CNG question

10 / Next step

Find out if your vehicle suits CNG.

Send us the make, model and year on WhatsApp, or call the workshop. We'll take it from there.

Workshop320/2, Rose Garden, Mysore Road, opposite BHEL, Bengaluru 560026

Get directions

Also see: Home